|
TEST TUBE CLAMP, WOODEN |
|
For tubes from 10mm to 19mm diameter.
With a steel spring. Jaws open by thumb pressure. Smooth finish. Length about 180mm.
|
| Product Code: 2031
|
$0.99 & Up
|
|
|
|
|
WIRE GUAZE SQUARES |
|
Made of galvanised woven wire with edges carefully turned over.
|
| Product Code: 2210
|
$0.80 & Up
|
|
|
|
|
CLAMP, EXTENSION, RUBBER COVERED JAWS |
|
For ensuring a firm grip on small round or irregularly shaped objects.
Three pronged aluminum die-cast clamp with brass thumbscrew. Jaws are covered with replaceable rubber tube, which open from 3-90mm. Overall length approximately 250mm .
|
| Product Code: 2062
|
$6.85 & Up
|
|
|
|
|
Clamp Holder, Right Angle |
|
For connecting two rods at right angles forming L or T shape.
Made of die-cast alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 18mm diameter.
|
| Product Code: AS2063-01
|
$5.95
|
|
|
|
|
Clamp Swivel Burette/ General Purpose |
|
For holding burettes or a general purpose clamp in the lab. Rotates 360º, can be locked at any angle, rubber lined jaws open up to 43mm. Accepts rods up to 18 mm.
|
| Product Code: LC3380
|
$7.95
|
|
|
|
|
TRIPOD STAND, PLATED TOP |
|
Triangular shape top with each side approximately 125mm (5in) and detachable legs sloped outwards for stability. Overall height is approximately 220mm (8 5/8in). Made of plated steel.
|
| Product Code: 2058
|
$8.60
Special Order!
|
|
|
|
|
Clamp Extension, Four-Prong |
|
With interlocking jaws. For providing a firm grip on objects of diameter from 2mm to 90mm.
Four pronged clamp of cast alloy with brass thumbscrews and cork lined jaws. Overall length approximately 240mm.
|
| Product Code: AS2062-01
|
$5.95 & Up
|
|
|
|
|
|
|
Advanced Hand Counter |
|
This is a well constructed, high quality and high precision hand counter for professional and industrial use (BSI ISO 9001 Certified). It offers a more comfortable use, more visible display and higher durability. Counts from 0 to 9999. Button has audible click when depressed.
We offer hand counters or tally counters for wholesale and retail.
Same as MS504, but QC approved.
|
| Product Code: VG3509
|
$7.99
|
|
|
|
|
Test Tube Holder, Cross Pattern |
|
For handeling test tubes from 12 to 40 mm outer diameter.
Made from rolled brass strip with a spring clip. Mounted
in a polished wooden handle. Ovelall length about 220mm.
|
| Product Code: US2032
|
$4.50
|
|
|
|
|
Test Tube Rack, Transparent |
|
A 40 tube rack for tubes up to 18 mm in diameter. Three tier design measures (LxWxH), 265 x 112 x 60 mm. The lower plate has rounded wells with drain holes. Convenient hand grips on both sides.
This test tube rack is made of polystyrene.
|
| Product Code: TTRACKP40
|
$10.00
|
|
|
|
|
Spatula |
|
Stailess steel, polished spatula with one side spoon and one side flat. Available in two different sizes.
|
| Product Code: LC3568
|
$3.50 & Up
|
|
|
|
|
pH Indicator Paper Roll |
|
pH indicator rolls are recommended for laboratory uses where higher quality indicators are expected. The clear plastic dispenser protects the indicator paper from environmental fumes that may change the color of paper. The color chart is inside the dispenser. Each roll contains 500cms of 7mm wide pH paper.
|
| Product Code: PHROLL111
|
$13.00
|
|
|
|
|
pH indicator paper book (pH: 1-14) New version |
|
New Version: These Ph Indicator papers come in books of 80 strips that can easily be detached from the book on a perforated line.
All you have to do is just dip in and read off! Use these pH indicator strips
for rapid measurement of pH in a liquid sample.
pH papers are available for wholesale and retail.
|
| Product Code: PHBOOK114
|
$2.99 & Up
|
|
|
|
|
Metal Electrodes Set of 11 |
|
For use with electrovoltaic cells or in various other chemical, physics and electricity experiments.
Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system).
Carbon (graphite) is 5 mm (1/8") thick.
This is the most complete collection of metals offered by MiniScience. All metal electrodes are stamped with 2 letter identification code for easy identification.
WARNING: Metal electrodes have sharp edges and can cause injury. Not a toy!. Handle with care.
|
| Product Code: METELECT11
|
$25.00
|
|
|
|
|
Clamp Extension, Rubber covered jaws |
|
Retort clamp. For ensuring a firm grip on small round or irregularly shaped objects.
Three pronged aluminum die-cast clamp with brass thumbscrew.
|
| Product Code: AS2062-2
|
$9.90 & Up
|
|
|
|
|
SUPPORT RINGS, CAST IRON |
|
For use on support rods, lattices etc., upto 13mm ( 1/2in) diameter.
With integral bossheads. Distance from center of ring to center of bosshead is 10.5cm (4 1/4in). Brass thumbscrew. Enamel finish.
|
| Product Code: 2038
|
$5.60 & Up
|
|
|
|
|
SLOTTED MASSES, SPARE |
|
For slotted masses on rack and 50g hanger.
Made of brass with standard slots as supplied on racks.
|
| Product Code: 3412
|
$1.20 & Up
|
|
|
|
|
|
|
STEEL BALLS |
|
As a substitute for iron filings for studying the phenomenon of magnetic fields. Form clusters and chains between unlike poles of magnets.
Polished, hardened spheres of diameter 3mm. Pack of 100.
|
|
|
|
|
MASS SET, HEXAGONAL |
|
For general science and physics laboratory work.
All are made of stove enamelled cast iron masses, except the 10g and 20g masses, which are made of polished brass. Packed in a cardboard box. Set of 7 masses: one each of 10g, 20g, 50g, 100g, 200g, 500g and 1000g.
|
| Product Code: 3402
|
$22.55
Special Order!
|
|
|
|
|
SUPPORT STANDS, RECTANGULAR, STEEL BASES |
|
Consists of a base made from 3mm thick steel sheet with rubber feet for stability. The base has a hole drilled, close to the edge (except the 300 x 150mm base, which has two holes). Supplied with a plated steel rod which can be easily screwed to the base for storage. Which has black enamel finish with an undercoating on the bottom.
|
| Product Code: 2051
|
$9.60 & Up
Special Order!
|
|
|
|
|
CLAMP HOLDER, RIGHT ANGLE |
|
For connecting two rods at right angles forming L or T shape.
Made of die-cast alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 18mm diameter.
|
|
|
|
|
DOUBLE CONE AND INCLINE |
|
For the dramatic and puzzling visualisation of the effect of change of centre of gravity of an object.
Consists of a pair of wooden double ended cones, a wooden diverging bar 0 to 10cm wide, serving as an inclined plane.
When the double cone is set on the bars of the inclined plane the cone appears to roll up the plane violating the law of gravity. This is possible because the axis of the cone is actually moving downward due to a widening of the track.
|
| Product Code: 3560
|
$24.00
|
|
|
|
|
TRIPOD STANDS, SINGLE RING |
|
For supporting small objects over a burner such as crucibles, evaporating dishes etc.
Consists of a hammertone finished cast iron circular ring diameter 100mm (4in), with three threaded and detachable plated legs which are sloped outward for stability. Shipped unassembled.
|
| Product Code: 2056
|
$6.80 & Up
|
|
|
|
|
CLAMP EXTENSION, FOUR-PRONG |
|
For providing a firm grip on objects of diameter from 2mm to 90mm.
Four pronged clamp of cast alloy with brass thumbscrew and cork lined jaws. Overall length approximately 240mm.
|
| Product Code: 2062
|
$6.85 & Up
|
|
|
|
|
SLOTTED BASE |
|
For holding flat object upright.
Cast iron, enamelled base with steel thumbscrew. Distance between the jaws is 3.4cm and the height of the jaw is 4cm. Dimensions: (l x w), 9.5 x 7.5cm.
|
|
|
|
|
|
|
TRIPOD STAND WITH CONCENTRIC RINGS |
|
For supporting various sizes of crucibles, and apparatus.
Consists of a circular tripod stand with two removable concentric rings. The plated steel legs are detachable and sloped outwards for stability. Outer diameter of the ring is 150mm (6in) and overall height is 220mm (8 5/8in). Black enamel finish. Shipped unassembled.
|
| Product Code: 2057
|
$15.50
Special Order!
|
|
|
|
|
SUPPORT STANDS, RECTANGULAR, CAST IRON BASES |
|
Rugged base for stability. Base drilled and tapped on edge (except the 300 x 150mm base, which has two holes). Plated steel rod can be unscrewed from the base for storage. Chemical-resistant, baked enamel finish Undercoated.
|
| Product Code: 2050
|
$12.00 & Up
|
|
|
|
|
|
|
WEIGHTS FOR SONOMETER |
|
Four slotted iron masses of 500g each on a 500g iron hanger.
|
| Product Code: 3635
|
$22.00
|
|
|
|
|
Rubber Tubing |
|
This high grade, medium wall rubber tubing is suitable for science
experiments and general laboratory use. It is perfect for experimentation
dealing with the physics of different liquids.
|
| Product Code: RUBTUB
|
$5.00 & Up
|
|
|
|
|
CYLINDER SET, METALS |
|
Set of six cylinders of aluminum, brass, copper, iron, lead and zinc. Packed in a cardboard box.
|
| Product Code: 3525
|
$9.00 & Up
|
|
|
|
|
CYLINDER SET, METALS |
|
Set of four cylinders of (d x h), 50mm x 13mm, one each of aluminum, brass, copper, and steel. Packed in a cardboard box.
|
| Product Code: 3528
|
$15.80
|
|
|
|
|
OVERFLOW CAN |
|
For determining the volume of an irregularly shaped body when used in conjunction with a catch bucket. Suitable for density cylinders, sinkers and Archimedes principle devices.
Made of galvanised steel sheet. The spout is properly angled to accurately measure displaced liquid. Hammer tone finished.
|
| Product Code: 3536
|
$8.60 & Up
|
|
|
|
|
FUNNELS, POLYPROPYLENE |
|
For conveniently pouring liquids in containers. Translucent.
|
| Product Code: 2209
|
$0.72 & Up
|
|
|
|
|
CORK BORERS SET |
|
Made of plated sharpened brass tubing with attached handles including a steel punch. Diameters of the holes made, start with 5mm increasing as shown in the following data table.
|
| Product Code: 2093
|
$6.50 & Up
|
|
|
|
|
CRUCIBLE TONGS |
|
For handling or manipulating hot crucibles and similar apparatus.
Corrugated tips for easy handling. Riveted joint. Finger openings are large enough for firm grip. Overall length about 200mm.
|
| Product Code: 2020
|
$2.40 & Up
|
|
|
|
|
CORK PRESS |
|
For tapering, softening for boring and reducing corks upto 30mm diameter for exact fit.
Made of cast iron. Rotary form. Mounted on wooden base.
|
| Product Code: 2096
|
$15.25
Special Order!
|
|
|
|
|
3 Beam Balance Scale |
|
This 3 Beam Balance is a classic triple beam with a capacity of 2610 grams
and readability of 0.1 grams. It comes complete with upgrade attachment
weights. It costs 35% less then the competition AND this triple beam
balance comes complete with the upgraded attachment weights for free (Ohaus
charges $30 extra for them).
|
| Product Code: TRIPBB
|
$89.00
|
|
|
|
|
CHROMATOGRAPHY SPRAYER (ATOMISER) |
|
For spraying visualising reagents on chromatography paper, plate, tlc etc. using bellows or compressed gas.
Made of borosilicate glass. Consists of an Erlenmeyer flask reservoir with ground joint secured by springs to the sprayer unit. Supplied with a bellow.
|
| Product Code: 5590
|
$27.00 & Up
Special Order!
|
|
|
|
|
BURET CLAMP (All metal) |
|
For double buret. This is an all metal clamp to hold 2 burets. Easy clamping support on support stand rod up to 18mm
|
| Product Code: 2062-05
|
$19.00
Special Order!
|
|
|
|
|
|
|
Test Tube Clamp, Wooden |
|
This wooden clamp can be used for tubes from 10mm to 19mm.
With a steel spring. Jaws open by thumb presure.
Smooth finish.
Length about 180mm
|
| Product Code: US2031
|
$0.95 & Up
|
|
|
|
|
Test Tube Rack, Wooden |
|
This test tube rack can hold test tubes right side up or upside down for
drying. It is made of kiln dried wood, has six openings of 24 mm diameter
and six drying pins, measures (L x W x H) 240 x 70 x 90 mm and is oil finished.
|
| Product Code: TTWRACK6
|
$10.00
|
|
|
|
|
Closed Type Hoffman Screw |
|
This closed type, Hoffman Screw is made of chrome-plated brass. The
opening measures 1 inch. The Hoffman Screw is perfect to use as a valve or
tubing clamp with any rubber tubing. This screw allows you to open and
close the rubber tubing during your projects. It is not sharp and as a
result, it will not damage the rubber tube. |
| Product Code: HOFFSCREW
|
$2.50
|
|
|
|
|
Microscope Slide Box, 25 Slides |
|
This plastic Microscope Slide Box is used for storing standard, 75 x 25 mm (length x width), microscope slides in individually numbered grooves. It is made of ABS polymer and is equipped with a printed index card for recording the titles. This box is perfect for your home or laboratory in order to keep all those specimen organized and labeled.
|
| Product Code: MSLIDBOX
|
$8.00
|
|
|
|
|
Pen Type pH meter |
|
Portable pocket size pH meter with automatic temperature compensation, Reliable and stable, Low cost, Easy operation, Easy to carry.
|
| Product Code: PH009IA
|
$29.00
|
|
|
|
|
Cotton Paper - Cellulose Paper - 2.5 um filter pap |
|
This highly absorbent paper is made of 100% pure cotton and can filter solids as small as 2.5 um.
It is used as a high quality filter paper, chromatography paper and electrophoresis paper.
It comes in a 50cm x 50cm sheet folded to simplify shipping. You may cut it to smaller sizes and strips as you need.
|
|
|
|
|
Large Filter Paper |
|
This high quality neutral filter paper is suitable for normal filtration.
It contains very low ash content and comes in packs of 100. Each piece is
18.5 cm in diameter. Filter paper is often used in laboratories or at home
to filter substances for further study.
|
| Product Code: FILTP
|
$8.00
|
|
|
|
|
Brush for test tubes |
|
Test tube brush is available in 3 different sizes. |
| Product Code: US2080_1
|
$1.00 & Up
|
|
|
|
|
pH meter, portable pentype |
|
Portable waterproof pH meter with automatic temperature control, Replacement Electrode Design, Reliable and stable, Long battery life, Easy operation, compact, handy.
|
| Product Code: PH003II
|
$44.00
Special Order!
|
|
|
|
|
Test Tube Rack (ABS Polymer) |
|
A 20 tube rack for tubes up to 19 mm in diameter.
Three tier design measures (LxWxH), 325 x 125 x 70 mm.
The lower plate has rounded wells with drain holes.
Convenient hand grips on both sides.
|
| Product Code: TTRACKPOLY
|
$12.00
|
|
|
|
|
Metal Cylinder Set (6 Pieces) |
|
Perfect for science enthusiasts, collectors, or science experiments.
With these metal cylinders you can find and compare metal density or study the
different properties of metals.
Available in 30mm and 40mm lengths and 10mm diameter. |
| Product Code: METCYLSET6
|
$9.00 & Up
|
|
|
|
|
Teclu Bunsen Burner |
|
This more advanced Teclu Burner can be used for obtaining a very hot flame. It is suitable for glass work and soldering.
|
| Product Code: BUNBURNTEC
|
$16.00
|
|
|
|
|
Microscope Slides and Covers |
|
These glass microscope slides and covers are blemish free and clear so that you can see your results and not the imperfections. They are perfect for your home or laboratory.
|
| Product Code: MSLIDECOV
|
$7.50
|
|
|
|
|
Microscope Slides Staining Kit |
|
This Slides Staining Kit consists of 3 types of stains to help view different
sections of plants and animal tissues as well as bacteria's and protozoa's.
This set is a welcome addition to any home or professional lab and is essential in micro organism studies
|
| Product Code: SSTAINKIT
|
$16.00
Special Order!
|
|
|
|
|
Portable pen type pH meter |
|
Portable pocket size pH meter with Automatic temperature compensation, Reliable and stable, High accuracy with 0.01 pH resolution, Low cost,
Easy operation, Easy to carry.
|
| Product Code: PH009II
|
$48.00
|
|
|
|
|
pH meter, Portable pen type |
|
Small pocket size pH meter, Easy-to-read Custom Dual-level LCD, On-the-spot measurement, Automatic temperature compensation,
Stability indicator, Reliable and stable, Low cost, Easy operation, Easy to carry.
|
| Product Code: PH009III
|
$58.00
|
|
|
|
|
Polypropylene Staining Jar |
|
This polypropylene staining jar is used for staining microscope slides with dyes or chemicals. It has five grooves to hold 10 standard, 75 x 25 mm (length x width), slides back to back in erect position. The domed threaded screw cap provides good protection against contamination and safe storage. This staining jar is approximately 114 mm high.
|
| Product Code: STAINJAR
|
$4.00
|
|
|
|
|
Rubber Tubing |
|
High Grade, Medium Wall rubber tubing for general laboratory use. Available in rolls of 3 meters (10 feet)
|
| Product Code: RTUBE
|
$3.75 & Up
|
|
|
|
|
Measuring Cylinder Set (3 Pieces) |
|
These polypropylene measuring cylinders are single piece, molded of
translucent plastic with raised numerical graduations. They are resistant
to the most common acids, bases and solvents. They also have a broad base
for great stability and pouring spouts and they are autoclavable to 130°C. |
| Product Code: MEASGCYLSE
|
$7.00
|
|
|
|
QuickLinK
