Screw base 1.2 volt miniature lightbulb used with miniature base.
1.2 Volts, 0.25 Ampers, TL-3
Comes in packs of 10.

For generating static electric charges and causing electric discharges. Relative to Van de Graaf it produces higher current with lower voltage. Consists of two high resistance plastic disks of diameter 25cm approx, with equally spaced metal sectors. The discs are supported in two rigid upright supports, rotating in opposite directions with a hand crank. Provided with a system of induced charge collecting brushes, adjustable ball-ended electrodes and cylindrical Leyden jar capacitors for obtaining higher potential. Produces substantial opposite charges which are deposited in the capacitors and on metal spheres. A rapid sequence of sparks can be generated by lowering the systems capacitance. Mounted on insulated wooden base.

PVC insulated copper wire and 50mm PVC insulated alligator clips on both ends

Spool of 120 grams or 500 feet magnet wire gage 28, with metallic brown color. For low temperature applications up to 120șC.
MAGWIRE

This magnet wire is insulated with a thin layer of resin and is the perfect choice for construction of electromagnets and electric generators.
MAGWIRE

Model of lifting magnet used in industry, such as scrap metal lifter. Consist of two plastic bobbins wound with enamelled copper wire and mounted on each arm of a soft iron U-core. Each of the bobbins is fitted with two 4mm socket binding posts. Includes an armature with hook to be used as a lifting ring. Operates on 3-6 Volts D.C. Overall length 100mm.

Miniature Incandescent Lamp or lightbulb, Voltage: 5.1 Volts Ampers: 0.15 Base: Miniature Screw Bulb: G4.5 Each order is for 10 light bulbs.

These Zinc (Zn) high purity plates are available in 2 different sizes. They are approximately 1 mm thick, and have high quality, high purity and shiny surfaces.

Miniature Incandescent Lamp Voltage: 2.25 Volts, Ampers: 0.22, Base: Miniature Screw, Bulb: Tubular Lens end (TL3).
Comes in packs of 10.
This is also a replacement bulb for pocket microscopes and many other devices that use 2 AA batteries.

For electrolysis of reactive materials like hydrochloric acid and other compounds. Suitable alternative to platinum. Size (l x d), 150 X 5mm. Alligator clips can be used for making wire connections.

For transferring electrostatic charges from one body to another such as Leyden jars and electroscopes. Consists of a plated brass disc of diameter 25mm on a 15cm long insulated handle.

Comprised of two or more brass blocks fitted with brass terminals and mounted on a black bakelite base. Tapered plugs with bakelite moulded tops fit into the tapered holes between the blocks providing low resistance contact. With rubber feet.

Useful as a basic component for any electrical laboratory. Mounted on bakelite base. Allows visible connection for easy use. With screw holes and suitable for bench fixing and panel mounting. Available in four configurations.

More sensitive instrument as leaf deflection is unaffected by air currents or by charges residing on the case. Reacts only to charges which are intentionally brought near or put on them. Comprised of a box made of aluminium with two transparent glass windows to shut out air currents and a plated metal support rod entering from the top through a polyethylene insulator. Two leaves of thin aluminium foil are suspended from the support rod. Supplied with three pairs of aluminium leaves.

For experiments in detection of electric charge and determination of polarity. Consists of an Erlenmeyer flask 250mL, and a plated rod with a knob of diameter 16mm ( 2/3in) passing through a rubber stopper. A pair of aluminium leaves are suspended from the rod.

For providing momentary contact in electrical circuits which are normally open. Can also be used in morse code applications. Consists of a bakelite base with two 4mm socket binding post terminals. Circuit is closed with plated spring hard brass strip with insulated knob. Silver contacts.

For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.
This is the most complete collection of metals offered by MiniScience. All metal electrodes are stamped with 2 letter identification code for easy identification.
WARNING: Metal electrodes have sharp edges and can cause injury. Not a toy!. Handle with care.

To produce high voltage alternating current or pulses of high voltage current from a low voltage direct current source. Suitable for use with gas-filled discharge tubes, vacuum tubes, eudiometers and for general laboratory work. Comprised of two coils fully enclosed in a polished wooden case with binding posts. Includes adjustable vibrator system, primary current polarity reversal and off-on switch, a condenser enclosed in the box and special alloy contacts. Spark gap at the discharge points can be adjusted by sliding rods back and forth. Requires 6-12 volt power source such as a battery.

For demonstrating the attraction and repulsion of electric charges. Consists of a an insulated brass pillar and hook on a base. Supplied with two colored pith balls with strings attached.

For measuring the quantity of electricity from the mass of copper deposited on one of its electrodes. Consists of three copper plates suspended from a bakelite cover of a plastic jar. Outer two electrodes acting as double anode are connected to one binding post on the top. The third inner copper plate fixed to another binding post acts as a cathode and can easily be removed for weighing.

AMM360 is a desktop analog multitester for measuring DC Volt, AC Volt, DC Current and Resistance. AMM360 can be used as a very sensitive galvanometer and can show as low as 0.01 DC voltage. AMM360 can also be used to test transistors and diodes.

Use it as voltmeter, ohmmeter or ameter.

This simple switch can be used for all low voltage applications. It is a double blade switch; so, it connects or disconnects two circuits simultaneously. Mount it on any project board or wooden board using a pair of wood screws.

Used to study electromagnetic induction & transformer principles. The outer coil is about 3" tall and 2 1/2" in diameter. The inner coil is about 3" tall and 1 1/4" in diameter. The removable steel core with handle is 1/2" in diameter and 4" tall. All coils are wrapped with magnet wire with insulated binding posts as connectors.

These solar cells are used to power small motors and other devices which draw small amounts of current. Can be used individually or linked to each other for more voltage or more current.

This simple switch is used for making electrical circuits by students. This quality knife switch is perfect for science projects and electronic experimentation. With its predrilled holes, it can easily be mounted on any wooden surface or project board. Because of the open structure of the switch, you can visually determine if the circuit is closed or open.

Size (l x w), 125 x 50mm with 4mm socket binding post terminal.

Combination set of magnesium electrodes includes 2 flat electrodes and 2 coil electrodes made of high purity magnesium metal. Flat electrodes are stamped with letters Mg to identify the electrode type..
Magnesium electrodes may be a valuable addition to your collection of metals.

Magnesium electrode flat is made of high purity magnesium metal cut in a rectangle shape and stamped with letters Mg to identify the electrode type..
Magnesium electrode may be a valuable addition to your collection of metals.

Magnesium electrode coil is made of high purity magnesium strip formed as a coil in order to provide a larger surface contact with electrolyte.
Magnesium coil may be a valuable addition to your collection of metals.

These copper (Cu) metal electrodes are 1.5" x 6" and come two in a pack.  This copper is high purity and high quality. .
Copper electrode sheets may be a valuable addition to your collection of metals.

Iron electrodes measure 5" x 1" x 1/16" with rounded corners. Made of low carbon iron sheets and packed in sets of 2 for chemistry and physics experiments where iron is required.
Iron electrodes can be a valuable addition to your collection of metals.

With glass stopper - uncalibrated.

This small generator (Dynamo)comes with components that allow you to connect it to any bicycle and produce electricity while riding a bike. Electricity produced by this generator can be used to light up multiple light bulbs.